Volume 23, Issue 107 (12-2013)                   J Mazandaran Univ Med Sci 2013, 23(107): 126-138 | Back to browse issues page

XML Persian Abstract Print


Abstract:   (21792 Views)
Background and purpose: Furfural compound is very harmful to health that is used or generated in many industries such as oil refineries, petrochemical, pharmaceutical, paper, etc. The composition is one of the critical pollutants that is difficult to remove using the biological methods therefore, the aim of this study was to evaluate the performance of TiO2 nanoparticles in the removal of furfural in the presence of sunlight and UV radiation. Materials and methods: In this study, TiO2 was prepared by sol – gel method and the properties of nanoparticle were determined using SEM. The number of samples was determined through the central composite statistical methods. The samples with definite concentration of furfural and nanoparticle in different operational conditions were exposed to sunlight and UV radiation, individually. The furfural concentration was measured using HPLC. Data analysis was performed using Minitab 16 software. Results: The results showed that the removal efficiency of furfural increased with rising staying time, nanoparticle dose and pH and decreased with rising of the furfural concentration in both methods. The highest removal efficiency of TiO2/UV and TiO2/sun methods were 87 and 45 percent, respectively. Conclusion: The rate of degradation and elimination furfural in both sunlight and ultraviolet radiation photocatalytic methods increased. The efficiency of TiO2/sun method in comparison with TiO2/UV method is negligible.
Full-Text [PDF 464 kb]   (3674 Downloads)    
Type of Study: Research(Original) | Subject: health

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.