TY - JOUR T1 - Degradation of Methylene Blue Dye Using Fenton/PhotoFenton-Peracetic Acid (UV/Fe3+-CH3COOH−H2O2) Processes from Aqueous Solutions TT - تجزیه رنگ متیلن بلو با استفاده از فرآیند های فنتون/فتو فنتون-پراستیک اسید ( UV/Fe3+-CH3COOH−H2O2) از محیط های آبی JF - J-Mazand-Univ-Med-Sci JO - J-Mazand-Univ-Med-Sci VL - 27 IS - 153 UR - http://jmums.mazums.ac.ir/article-1-9174-en.html Y1 - 2017 SP - 95 EP - 111 KW - Advanced Oxidation Process KW - UV radiation KW - Photo-Fenton KW - Methylene Blue dye N2 - Background and purpose: Industries are one of the main sources of producing wastewater accounting for 20% of water pollution. Treatment of dye wastewaters is one of the major challenges in textile industry. The aim of this study was to investigate the performance of advanced oxidation processes, Fenton-Peracetic acid and Photo-Fenton-Peracetic acid for removal of methylene blue (MB) dye from aqueous solutions. Materials and methods: We conducted an experimental study in which the effects of operating parameters such as pH (3-9), contact time (2-30 min), Peracetic acid concentration (5-50 mg/L), ferric chloride concentration (5-200 mg/L), and methylene blue concentration (5-100 mg/L) were investigated on the removal efficiency of MB dye in the presence and absence of ultraviolet radiation. The experiment was conducted in a batch reactor and the efficiency of method to remove color was measured using a spectrophotometer. Results: In current study the highest removal efficiency (99%) was attained by Fenton-Peracetic acid process under the optimized conditions as follows: pH 3, Peracetic acid concentration 30 mg/L, ferric chloride concentration 60 mg/L, methylene blue concentration 10 mg/L, and contact time of 30 min, but, the same amount of color was removed in shorter time (20 min) by Photo-Fenton-Peracetic acid process. Conclusion: High removal efficiency of the Photo-Fenton-Peracetic acid process in a relatively short time, which is because of hydroxyl radical production, show that this process can effectively be applied to remove MB dye and can be considered as a suitable alternative to conventional systems for treatment of wastewaters containing similar organic matters. M3 ER -