Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

---

Background and purpose: Removal of lead as a toxic metal from contaminated water resources is necessary due to the dangerous effect of lead. One of the most effective methods of removal is the adsorption process. The aim of this study was adsorption and magnetic separation of lead from synthetic wastewater using iron oxide nanoparticles and carbon (ION/C) composite Material and Methods: In this study nanoparticles of iron oxide (ION) were used as a source of iron for magnetic separation of powder activated carbon from solution samples. The physical and surface properties of the adsorbent were studied along with influencing factors (pH, contact time, adsorbent dosage, initial lead concentration, and temperature) on the adsorption process. Kinetic equations and equilibrium isotherms studies were also conducted. Results: The size of ION and specific surface area of ION/C were found to be 30-80 nm and 671.2 m2/g, respectively. We observed that the adsorption process reached equilibrium at 60 min and pH=6and adsorption efficiency increased by increasing the amount of adsorbent and temperature. Maximum adsorption capacity based on Langmuir isotherms was obtained 67.1mg/g at 50 °C. Conclusion: According to this study it is believed that magnetized active carbon by keeping its physical and surface properties could be a suitable method to solve some related problems including separation and filtration.

Keywords: MTT Iron oxide nanoparticles, lead, activated carbon, adsorption, synthetic wastewater

Full-Text [PDF 1017 kb]   (3631 Downloads)    

Add your comments about this article : Your username or Email:

---

---